Convert Windows 10 Pro ISO to Enterprise

For recent builds of the Windows 10 Technical Preview, when Microsoft has released ISO images of a build they have elected not to release ISO's of Enterprise Edition.  The most recent Enterprise edition ISO available is for build 10074.  While it is possible to download and install that build, then upgrade to the more recent builds using windows update, having install media for the current version would make things much easier.

The good news is, all of the bits for Enterprise edition are included in the ISO of Windows 10 Pro Technical Preview, and with a few simple commands it's possible to change from Pro to Enterprise edition.

To get started, download the latest Windows 10 Pro Technical Preview ISO.  As of the time of this writing, the image currently available is build 10162.  Extract the contents of the iso into a temporary directory.  In my example, I use D:\10162\.

From a command prompt, Create an empty directory to mount the wim file in, and mount the image:


Check the current edition and available targets that the mounted image can be upgraded to:



As shown in the output above, my image is currently Professional edition, and can be upgraded to either Enterprise or Education editions.  I'll upgrade to Enterprise using the /set-edition parameter of dism, then run dism again with the /get-currentedition parameter to confirm the change was successful:



Since the Enterprise edition requires a different product key than the Professional edition, the product key used in the image must also be updated:


Lastly, unmount the wim image, committing the changes that were made:

D:\10162 now contains the install files for Enterprise edition.  Run setup from there, or copy the files to bootable media to install a clean version of the latest Windows 10 Enterprise Technical Preview.

For reference, the commands used in the screenshots above are listed in order below:
md d:\mount
dism /mount-wim /wimfile:d:\10162\sources\install.wim /mountdir:D:\mount /index:1
dism /image:d:\mount /get-currentedition
dism /image:d:\mount /get-targeteditions
dism /image:d:\mount /set-edition:Enterprise
dism /image:d:\mount /get-currentedition
dism /image:d:\mount /set-productkey:CKFK9-QNGF2-D34FM-99QX2-8XC4K
dism /unmount-wim /mountdir:d:\mount /commit

I hope this information is helpful.  While it was written and tested with Windows 10 Technical preview, it should also work with Windows 8, 8.1, Server 2012 and 2012R2 (with minor changes), and most likely with the RTM version of Windows 10 when it is released.  More information about the DISM parameters used can be found on technet.

Comments

Post a Comment

Popular posts from this blog

Mystery Solved: Bitlocker is enabled, but Intune shows the computer as non-compliant for Require Bitlocker

For some time, I have struggled to understand why Intune reports some computers as non-compliant with the "Require Bitlocker" setting, even though Bitlocker is enabled and working on the computer.  In my searches for an explanation, I found the same question asked by many others, but never an answer.  Until today. I accidentally stumbled across this article from Microsoft's Rob Lane , which explains how the Require Bitlocker setting is evaluated and why it might seem to incorrectly report a non-compliant state.  I encourage you to check out that article for full details.  I'll just summarize here the part that suddenly made this bitlocker compliance issue make sense to me. The "Require Bitlocker" setting in Intune relies on the Device Health Attestation (DHA) service in Windows 10 to report the state of Bitlocker encryption on the computer.  If Bitlocker protection is disabled or suspended, DHA will report that the computer is non-compliant with this ...
Read more

Windows 10 Credential Guard breaks WiFi

Recently, I ran into an issue with computers running windows 10 that would not connect to our WPA2-Enterprise encrypted wifi network.  When it failed to connect, there was no indication of why, only the message "Can't connect to this network."  The computers were able to connect to unencrypted networks and networks using a Pre-shared key for WPA encryption without issue. Checking the event logs on the RADIUS server to see why the comptuer failed to connect, there was no log entry for a connection attempt from the affected system.  The WLAN-Auto-Config log on the client listed a couple of errors, including Event ID 11006 and 12013, but other than showing that the failure reason was "Explicit EAP failure received", they didn't give much to go on: Log Name:      Microsoft-Windows-WLAN-AutoConfig/Operational Source:        Microsoft-Windows-WLAN-AutoConfig Date:          8/15/2016 1:11:20 PM Event ID:   ...
Read more

Data Sharing Service crashes on Windows Server 2016 - Event ID 7023

Image
While troubleshooting an issue recently on a Windows Server 2016 system, I noticed errors on the System event log about the Data Sharing Service crashing. The Data Sharing Service service terminated with the following error: %%3239247874 Searching online for more information about this service and why it might be failing, I came across a lot of people describing similar problems, but the only explanation and solution I found came from this December  blog post by Microsoft Japan .    Google translate did a great job making the post understandable to me, but since the information doesn't seem to have been widely publicized I thought I'd share it here to help get the word out. The Data Sharing Service fails due to a resource conflict with another service included in Server 2016, the User Access Logging Service.  Either one of these services alone will run without issue, but if one is already running and you try to start the other, it will fail. According to...
Read more